Brand New,Testing is fine.
1 Volume + 2 Tone pots with balance volume
Balance volume for pickup
Volume: Master
Bass: +/- 12dB at 85Hz
Treble: +/- 12dB at 7KHz
Is not "how many" it Only works with ACTIVE coil pickup.
these pickup different . And also much more expensive. This type of pickup uses 2 positive/"power" input wires. normal will have either 1 hot wire and 2 wires inside 1 cable or 1 hot wire with cable that has 4 wires inside.
This is wired as a 2 pickup system. The battery wires to the black and red wires on the belcat board. The positive from the pickups wire to the center posts on the double stacked pot and the grounds wire to the housing on the tone pot. Tone cap is preference and not needed, but can be wired to the center post and housing on the tone pot. This is how I wired mine and it seems to work fine. There might be some fine tuning needed depending on set up.
the tone post had the double hook up on it.
Package included:
1 xBelcat 2 Band Active EQ Preamp Circuit for Bass Pickup